Lubrite Industries is Manufacturer & exporter of Centralised lubrication systems like. Automatic Motorised lubrication units. deluxe lubrication units. electronis timers. electronic controllers. hand operated lubricator. pneumatic lubrications. Metering Cartridges. junction blocks. fittings(st. connectors, elbow connectors, banjo bolt assly, d/e connectors, clamps, tubinggs, planning/ installation of the system. Single Line Lubrication pumps. Manual grease, pumps. Pneumatic Grease pumps, Motorised Grease Pumps.Progreesive Block.Centralised Lubricatiobn Systems. Automatic Dual Line Lubrication Pump. Dual Line Dose Feeders.
 
Lubrite Industries is an independent 100% own manufacturing company which has achieved pioneer status in terms of technology and manufacturing capabilities.
LUBRITE DUAL LINE system is designed to provide a positive means of dispensing lubricant to the bearings on a machine from a central pumping source. the versatile rugged equipment offers flexible in design and economy in operation.
LUBRITE DUAL LINE PUMP Consists of Reciprocating Motor Driven Plunger Pump with inbuilt Gear Box. The Pump incorporate a large grease reservoir with a heavy follower plate and tell Tale Rod. Limit switch is provided on the top of reservoir to indicate full and empty level of lubricant.On the pump Outlet , check value, pressure relief value, bleed value, inline filters are provided and it is connected to direction control value ( Reversing Value). The DC Valve gets signal from pressure switches (end pressure ralay) mounted on each line.The whole system is controlled with electric control panel.
Control Panel The feature of electric control panel are :
  • Main supply indication (440V Ac)
  • Pump On & Off indication and switches
  • Line 1 & Line 2 Separate indications
  • Selectable on - off Timer
  • Manual Mode (Continues Running) Auto mode (Running Through Timer)
  • Lubricant Level Indication
SPECIFICATION
Model LDL-50 LDL-100 LDL-150
Reservoir Capacity 50kg 100kg 150kg
Discharge of Pump per minute 125gm 250gm 500gm
Working Pressure 150kg/cm2 250kg/cm2 350kg/cm2
Maximum Pressure 3000kg/cm2 350kg/cm2 400kg/cm2
Electric Motor 3 Phase, 1500 rpm 1.5hp 2hp 3hp
 
DIMENSIONS IN mm
Model LDL-50 LDL-100 LDL-150
A 695 695 775
B 445 445 505
C 950 1205 1550
D 280 280 280
E 1000 1255 1600
F 1450 1755 2300
 
OPERATIONS

A central pumping station pushes lubricant through a reversing value (direction control valve) to either one of the supply lines. these lies run along the machine to feed lubrite dose feeders (measuring valves) mounted on the machine at a convenient position to be seen and close to the points to be lubrited . The Dose feeders are operated by hydraulic pressure from the pump delivering a metered quality (Dose) of lubricants to the bearing being served.
 
    Home | About Us | Products | Infrastructure | Quality | Contact | Enquiry      
Centralised Lubrication system | Automatic Lubrication syetem | Timing Devices | Hand Operated Single Shot | Pneumatic Single Shot | Metering Cartridges | Junction Block | Fittings | Tubings | Planning | Metered Flow Systems | Countinue Lubrication system | Recirculating Unit | Rotary Pump | Oil Flow Meter | Multi Point Lubrication system | Multiline Mechanical Lubricants | Radial Lubricants | Single Line Grease Lubrication | Manual Grease Pump | Pneumatic Grease Pump | Motorised Grease Pump | Progressive Block | Accessories | Dual Line Lubrication system | Dual Line Lubrication Pumps | Dual Line Dose Feeders | Manual Dual Line Grease Pump | Motorised Grease Transfer Pump | Grease Dispensers | Pneumatic Grease Dispenser | Hand Operated Grease Dispenser | Drip Feed Oiler | Oil Mist Lubricants |
  Designed By Om Internet Services