Lubrite Industries Logo

Lubrite Industries is an ISO Certified Centralised Lubrication System manufacturer and exporters from India. We manufacture Lubrication pumps and Lubrication systems.

We also manufacture Deluxe Lubrication Units, Electronic Timers, Electronic Controllers, Metering Cartridges, Junction Blocks, Fittings (st. connectors, Elbow Connectors, Banjo Bolt assembly, D/E connectors, Clamps, Tubings, Planning/ Installation of the system. Single Line Lubrication Pumps, Manual Grease, Pumps, Automatic Dual Line Lubrication Pump, Dual Line Dose Feeders.
Our Products - Header
 
Lubrite Industries is an independent 100% own world-class manufacturing company which has achieved pioneer status in terms of technology and manufacturing capabilities in the field of Lubrication. Decades of manufacturing experience assures that our products are among the best in the industry.
Centralised Lubrication System

Lubrite Metered Flow System Units

In this system what ever the amount of all is ejected by the pump per stroke/per cycle, is distributed among the lubricating points in ratio of flow value number of metered flow units.

Flow units are designed for use with Hand Operated or Cyclic delivery lubricators. They are non adjustable and are installed at each bearing to regulate oil delivery. Flow is in one direction only as indicated by the arrow and each increase in flow value number doubles the delivery. Caps and cons are supplied where illustrated.

REVERSE METERED FLOW UNITS
REVERSE METERED FLOW UNITS : 1/8” X 28 BSP Both ends LB 21
LB 22
LB 23
LB 24
LB 25
For 4 mm O.D. tubing. Screwed into tapped holes of junctions when feeding bearing through tail pipes.
 
STRAIGHT METERED FLOW UNITS
STRAIGHT METERED FLOW UNITS : 1/8” X 28 BSP Both ends LB 21
LB 22
LB 23
LB 24
LB 25
For 4 mm O.D. tubing. Mounted directly at the bearing and used at the end of the pressure lines.
 
ELBOW METERED FLOW UNITS
ELBOW METERED FLOW UNITS : 1/8” X 28 BSP Both ends LB 21
LB 22
LB 23
LB 24
LB 25
For 4 mm O.D. tubing and is used only when limited clearance is available above the bearing. These are made by screwing the Straight Metered Flow Units into Elbow Blocks
 
   

Instructional Layout of Metered Flow System

Instructional Layout of Metered Flow System

OHL
DATA OHL OHL/M
Reservoir Capacity 750 ml 400 ml
Maximum Overall Height 250 210
Horizontal Fixing Centers 125 105
Vertical Fixing Centers 95 55
Diameter of fixing holes 9 9
Oil Discharge per Stroke 2.50 c.c 2.50 c.c
Lubricator Model 1 Lubricator Model 2
TeChnical Specification: MSL I MSL II

These Pumps are mechanically operated by any moving part of Machine (com or similar) and are positioned as shown. Care Must be taken to ensure that piston always fully extends as the suction port is opened by piston at the end of the stroke.

Overall Height

150 mm 150mm
Overall Weight 40 mm 75 mm
Overall Depth 100mm 32 mm
Diameter of fixing holes 7 mm 7 mm
Maximum Stroke 15 mm 12 mm
Discharge/Stroke 2.30 cc/Stroke 0.60 cc/Stroke
 
Home | About Us | Products | Infrastructure | Quality | Contact | Enquiry  
(C)Copyright Lubrite Industries.
Our Facebook Page Lubrite on Google Plus Follow our tweets