Lubrite Industries Logo

Lubrite Industries is an ISO Certified Centralised Lubrication System manufacturer and exporters from India. We manufacture Lubrication pumps and Lubrication systems.

We also manufacture Deluxe Lubrication Units, Electronic Timers, Electronic Controllers, Metering Cartridges, Junction Blocks, Fittings (st. connectors, Elbow Connectors, Banjo Bolt assembly, D/E connectors, Clamps, Tubings, Planning/ Installation of the system. Single Line Lubrication Pumps, Manual Grease, Pumps, Automatic Dual Line Lubrication Pump, Dual Line Dose Feeders.
Our Products - Header
 
Lubrite Industries is an independent 100% own world-class manufacturing company which has achieved pioneer status in terms of technology and manufacturing capabilities in the field of Lubrication. Decades of manufacturing experience assures that our products are among the best in the industry.
Centralised Lubrication Sytems

Electronic Timers

Electronic timers are used to maintain the Lubrication cycle in automatic single shot Lubrication Units. It is basically ON - OFF timer with following technical specifications.

Power Supply : 220 V AC + - 10%, 50 Hz
Operating Temperature : 0-55° C.
Maximum Power Consumption : 2.0 VA
Control Action : On Off Type.
OutPut : 220 V AC
Start : Automatic On output when power is turned On
Application : provides On - Off action of Lubricator Motor
 
Electronic Timer for Lubrication Pumps 1 Electronic Timer for Lubrication Pumps 2 Electronic Timer for Lubrication Sytems 3

Model : ET -5

Model : ET -5D

Model : ETC-5

  • Suitable for direct running of Single phase motors of Lubrication Units : LAU-03 SFS, LAU-03SFT, LDU-03S/ST
  • Suitable for 3 phase Units where pressure switch is not present such as LAU-03 FS, LAU-03FS, LAU-08FS. however a contactor is to be used in this case.
  • Suitable for solenoid operation of direction control valve with pneumatic oil pump like Pn-8/16.
In case arrangements of contactor is not possible, ETC-5 can be used. It is complete arrangement with inbuilt timer, contactor and indication of low oil in the pump thru float switch. This device is very useful in the adverse conditions as it even doesn't require neutral in the input supply.
Model ON TIME OFF TIME SETTING OF TIME PRESENCE OF SWITCH FOR LUB SHOT
ET-5 5 seconds fixed 1-128 minutes By Knob Yes
ET-5D 5 seconds fixed 1-128 minutes By Knob Yes
ET-5D 5 seconds fixed 1-128 minutes By Knob Yes
Go Back
Send Product InquiryDownload Complete Catalog of Lubrite Industries
Next Page

 

Home | About Us | Products | Infrastructure | Quality | Contact | Enquiry  
(C)Copyright Lubrite Industries.
Our Facebook Page Lubrite on Google Plus Follow our tweets